Camera Drivers; SanDisk SDDR-55 ImageMate X; SanDisk SDDR-55 ImageMate X for Mac. $39.99 for the first 12 months. ImageMate SDDR-289 Firmware update tool for Mac OS 10.7, 10.8 and 10.9. Step 1: Please copy SDDR-289 update software to the Mac HDD. In Mac OS 10.9.1 you may receive a message that state the. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer. Sandisk ImageMate 12-in-1 Card Reader Driver Sandisk ImageMate SD Card Reader Driver ImageMate Card Reader Driver ImageMate. The Button Application), Mac OS 9.2+ or Mac OS 10.1.2+ (and proceed to Connecting). Install the Windows 98SE Driver 1. Insert the CD included with the ImageMate USB 2.0 Reader/Writer device into the CD-ROM of your computer. Left-click on the START menu and open the RUN menu. Click BROWSE to locate the drive letter of your CD-ROM.

Imagemate 12 In 1 Manual

Sandisk Imagemate 12 In 1 Driver Mac High Sierra

SOLUTION 1 - Verify if minimum system requirement is met.
SanDisk card readers support Windows Vista, Windows XP SP2 and Windows 2000 SP4, Windows 7.
NOTE: No additional drivers need to be downloaded for the card readers as they are native to the above mentioned supported operating systems.

For Mac users, seeTroubleshooting USB device on Mac

SOLUTION 2 - Verify the reader's status under Device Manager.
STEP 1 - Connect the reader to the PC

NOTE: It is recommended that you plug your card reader to the back USB port on your PC to ensure that there is enough power from the USB port for the card reader to be detected properly.
STEP 2 - Check under Device Manager
1. Right-click My Computer.
2. Select Manage.
3. On the left pane, click Device Manager.
NOTE: The card reader will appear in two places: Disk Drives and Universal Serial Bus controls as USB Mass Storage. If there is a yellow exclamation point (!) or question mark (?) next to the device, try to refresh the drivers.

STEP 3 - Refresh the drivers
1. Right-click the entry with the error mark, select Uninstall.
2. On the top menu, click Action, and then click Scan for hardware changes.
STEP 4 - Verify if the reader is detected
1. Double-click My Computer.
2. Look for the card reader under Devices with removable storage.
SOLUTION 3 - Try other USB ports.
A yellow exclamation point (!) under Device Manager usually means that the device is not receiving enough power. If the reader is not receiving ample amount of power from the USB port, it may not function properly.
SOLUTION 4 - Change the drive letters
NOTE: The SDDR-89, SDDR-189, SDDR-289 reader should show 4 drive letters underMy Computer.